Sutton Coldfield
Bespoke TV Units in Sutton Coldfield
A television unit sized to your screen and equipment, built to sit properly within the room rather than added as an afterthought.
Media Walls for Sutton Coldfield homes
A dedicated TV unit is often the right choice where a full media wall is more than the room needs, whether that is a smaller living room, a bedroom, or a second reception room in a Sutton Coldfield home. The unit still needs to be designed around the actual television and equipment being used, rather than sold as a generic size that may or may not suit what you own.
Screen size is the starting point, since it determines the width of the unit and how much clearance is needed either side. We also account for the equipment sitting beneath or beside the screen, whether that is a games console, streaming box or amplifier, so storage is sized correctly rather than guessed at.
Ventilation and cable management matter just as much as appearance. Equipment generates heat and needs airflow, particularly when stored in an enclosed cupboard, and cables need a clear route from socket to screen to equipment so nothing trails across the front of the unit once everything is connected.
Drawers, wall-mounted sections and open shelving can all be combined depending on how much you want visible versus concealed. A wall-mounted unit gives a lighter, more contemporary look with visible floor clearance beneath, while a floor-standing design offers more storage capacity for households with a larger amount of equipment.
Working in Sutton Coldfield
TV unit projects in Sutton Coldfield often come from households wanting a considered piece of furniture for a secondary living space, bedroom or smaller reception room where a full media wall is not needed. Many properties locally have a mix of room sizes across different extensions or renovations over the years, meaning a unit designed for one room rarely suits another without adjustment. We size and configure each unit around the specific room and equipment involved.
Design considerations
- Television size
- Unit width and clearance are set against your specific screen size, with a degree of tolerance for future upgrades.
- AV equipment
- The equipment you own is measured and specified so ventilated storage compartments are sized correctly.
- Ventilation
- Airflow is planned around enclosed storage so equipment is not left to overheat during use.
- Cabling
- Existing socket positions are surveyed so cable routes can be built into the unit rather than left visible.
- Drawers and storage
- Drawer sizing reflects what you need to store day to day, from remotes to discs and smaller accessories.
- Wall-mounted furniture
- Where a floating design is chosen, wall construction is checked to confirm suitable fixing points for the unit's weight.
- Shelving
- Shelf spacing and depth are set to suit what will be displayed or stored, balanced against the unit's overall proportions.
- Lighting
- Discreet lighting beneath or within the unit can be included to highlight the shadow gap or shelving, planned in from the outset.
What can be included
01
Television size integration
Unit width and clearance sized to your specific screen, with allowance for a moderately larger television in future.
02
AV equipment storage
Ventilated compartments sized to the equipment you actually own, from consoles to amplifiers and streaming boxes.
03
Ventilation
Airflow designed into enclosed sections so equipment does not overheat during extended use.
04
Concealed cabling
Cable routes built into the unit from socket to screen to equipment, keeping the front of the unit free of visible wiring.
05
Drawers
Soft-close drawers for remote controls, discs or smaller items, sized to sit comfortably within the overall unit.
06
Wall-mounted options
A floating design with concealed brackets, giving visible floor clearance and a lighter appearance than a floor-standing unit.
07
Shelving
Open shelving sections for display or additional storage, positioned to balance the unit's overall proportions.
From our work
We survey and measure at the property, then design around the room as it is actually built.
Materials & finishes
Specifications are developed with you during the design stage and sampled before anything is built. Nothing here is a fixed range; we will say so where a material is the wrong choice for the room or the way it is used.
Hand-painted timber
Sprayed in a colour sampled and agreed before manufacture, forming the main body of most units.
Oak and walnut veneers
Grain-matched panels for a warmer finish, particularly on door and drawer fronts.
Fluted and reeded timber panels
Used on fronts or side returns for texture without introducing pattern.
Bronze and smoked glazing
For display sections either side of the screen where objects are meant to be seen.
Brushed brass and blackened steel hardware
Handles and trim chosen to suit the room's existing hardware.
Acoustic-permeable fabric panels
Used on fronts positioned in front of a speaker or soundbar, allowing sound through while concealing the equipment.
How the work is done
In line with our process on the process page, we measure the room and confirm your television and equipment before drawing the unit, so proportions and storage are correct from the outset. Manufacture takes place in our Derbyshire workshop, with delivery and installation carried out by the same team.
Read our full processExplore our work
Our published case studies show completed commissions in detail, from the brief through to installation.
View our projectsMedia Walls in Sutton Coldfield — your questions answered
Design
- Should I choose a floor-standing or wall-mounted TV unit?
- This depends on the room and how much storage you need. A wall-mounted unit gives a lighter appearance with visible floor clearance, while a floor-standing design generally offers more storage capacity for larger amounts of equipment.
- Can a TV unit be designed for a bedroom rather than a living room?
- TV units are commonly designed for bedrooms and secondary reception rooms as well as main living spaces, sized and finished to suit the room's specific character.
- Will the unit suit a future, larger television?
- We build in tolerance around your current screen's bezel so a reasonably similar future screen should still fit comfortably; a significant increase in size may need a small adjustment to trim.
- How do you decide the balance of drawers versus open shelving?
- This comes down to how much you want to keep visible versus concealed. We talk through your equipment and habits, then propose a mix of drawers, cupboards and open shelving to suit.
Materials
- Can the unit include glazed display sections?
- Bronze or smoked glazing is available for sections either side of the screen where you want to display books or objects rather than conceal everything behind solid doors.
- Will the finish match other furniture in my home?
- We can match paint colour or veneer taken from existing furniture or skirting where you want the unit to feel consistent with the rest of the room.
- Can a fabric-fronted section be included for a soundbar?
- Acoustic-permeable fabric panels can be used on a section positioned in front of a soundbar or speaker, allowing sound through while keeping the equipment concealed.
Installation
- How is cabling managed once the unit is installed?
- Cable routes are built into the carcass during manufacture, running from the socket position to the screen and equipment storage, so nothing is left trailing once installed.
- Can you check my wall is suitable for a wall-mounted unit?
- We check wall construction during survey to confirm suitable fixing points for the unit's weight, and arrange additional blocking in advance where a stud wall needs it.
- How long does TV unit installation take?
- This depends on the size and complexity of the unit, but installation is typically completed within a day for most single units. Our own installation team carries out this work, which means the same standards apply on every visit rather than varying between different fitters.
Practical questions
- Does the unit need ventilation for the equipment inside?
- Airflow is designed into enclosed storage compartments so heat is not trapped around equipment during extended use, factored into the design at the outset. We ask what equipment will sit inside the compartment during the design conversation, since the make and heat output determine whether a vented panel or a simple air gap is sufficient.
- Can a TV unit include a soundbar shelf?
- A shelf or recess for a soundbar can be planned into the design provided we know your equipment at the design stage, keeping it neatly positioned beneath the screen.
- Will drawers be quiet to use day to day?
- Soft-close drawer runners are fitted as standard, giving a quieter and more considered feel whenever the unit is opened and closed. We ask what will actually be stored during the design conversation, since that shapes drawer depth and shelf spacing far more usefully than a standard layout would.
- Can the unit be designed to match a media wall elsewhere in the house?
- Where you have or plan a media wall in another room, we can carry the same material palette and detailing through to a standalone TV unit for consistency.
Cost & quotations
- What does a bespoke TV unit in Sutton Coldfield cost?
- Cost depends on the size of the unit, materials, finishes, hardware, lighting and the complexity of the storage configuration. We do not quote a figure without seeing the room, so get in touch through the contact page to discuss your project.
Chester Thomas
- Where is the TV unit made?
- TV units are designed and manufactured in our workshop in Derbyshire, then delivered and installed on site by the same team. We keep the transformer and driver accessible for future maintenance, and colour temperature is agreed at design stage so it matches any existing lighting nearby.
- Do you also design full media walls with a fireplace?
- Where a fireplace is part of the composition, our media walls page covers that broader approach in more detail. Site visits, surveys and installation are carried out in person by our own team rather than a subcontractor, so the same people you speak with at enquiry stage are the ones who fit the finished piece.
- What areas do you cover around Sutton Coldfield?
- We install television units across Sutton Coldfield and the roads around it, alongside work in Staffordshire, Derbyshire and Leicestershire. Site visits, surveys and installation are carried out in person by our own team rather than a subcontractor, so the same people you speak with at enquiry stage are the ones who fit the finished piece.
Related bespoke services
Bespoke TV Units
A television housed in cabinetry sized to your wall, your screen and the equipment behind it.
Floating TV Units
A television unit that appears to hover clear of the floor, fixed on concealed brackets rather than legs.
Built-In TV Units
A television unit built into the wall itself, scribed to the alcove or opening rather than sat in front of it.
Bespoke Media Walls in Sutton Coldfield
A single composition bringing television, fireplace and storage together, scribed to the wall it occupies.
AV Cabinets
Cabinetry built around the equipment itself — receivers, consoles, routers and streaming boxes — kept ventilated and out of sight.
Bespoke Cabinetry in Sutton Coldfield
Cabinetry scribed to the room it occupies, whatever shape the walls and alcoves actually are.
Speak to us about your media walls in Sutton Coldfield on 07542 822456, email info@chesterthomas.com or send us the details.
Planning Something Bespoke?
Tell us about your space, what you're looking to create and where the project is located.