Swadlincote
Bespoke TV Units in Swadlincote
A standalone television unit sized to your screen and storage needs precisely, rather than chosen from a fixed range of widths.
Bespoke TV Units for Swadlincote homes
Where a full media wall isn't wanted or the room doesn't call for one, a freestanding or wall-mounted TV unit is often the better fit, particularly in a bedroom or a secondary living space in a Swadlincote home. The design starts with the television itself, its size and mounting method, and works outward to storage, rather than choosing a generic cabinet from a range of standard widths and hoping the screen sits well on top or above it.
In a bedroom, a lower, simpler unit is usually preferable, sized to sit comfortably at the foot of the bed without dominating the room, with drawer storage for everyday items rather than open shelving that tends to collect clutter over time. In a living room, particularly a smaller second reception room common in Swadlincote's terraced housing near the town centre, the unit might need to hold more — media equipment, books, or storage for household items — so drawer and cupboard allocation is planned around what will actually go into it rather than a fixed default split.
Cable management matters as much in a standalone unit as in a full media wall. We plan routing for power and any connected equipment so cables are not left trailing behind or beside the unit, and we consider ventilation where equipment generates heat, particularly in a more enclosed cabinet design intended to hide a games console or receiver from view entirely.
Finish and proportion are considered against the rest of the room, whether that means matching an existing chest of drawers in a bedroom or picking up a colour already used elsewhere in a living room. A TV unit that ignores what else is in the room, however well made, rarely feels like it belongs there in the way a piece designed alongside the existing furniture does.
Every TV unit is built in our Derbyshire workshop and installed by the same team that designed it, following the process at the process page. Dimensions, storage configuration and finish are agreed with you at drawing stage before manufacture, so there are no surprises once the piece arrives on installation day.
A TV unit is also a practical place to plan additional household storage that has nothing to do with the television itself, from spare remote controls and charging leads to board games, throws or ornaments that need a proper home rather than an open shelf gathering dust. We discuss this directly with you at design stage, since a unit that only accounts for media equipment often ends up with awkward overflow stacked on top within a matter of months. Getting the balance of open and closed storage right from the outset avoids that problem entirely, and it means the finished unit still looks tidy well after the novelty of a new television has worn off.
Working in Swadlincote
A standalone TV unit is often the more practical choice in a Swadlincote bedroom or a smaller second reception room, where a full media wall would be disproportionate to the space available. In larger living rooms, particularly where a chimney breast already houses a wall-mounted screen, a lower unit beneath it can provide useful storage without competing with the room's existing focal point, and works well in both older terraces and newer estate housing around the town.
Design considerations
- Television size and mounting
- The unit is sized precisely to the screen and how it will be mounted, whether wall-fixed or unit-supported.
- Room type and scale
- A bedroom unit is designed lower and simpler; a living room unit may need to hold considerably more storage.
- Storage contents
- Drawer and cupboard space is allocated to what will actually be stored, rather than a fixed default split.
- Cable and equipment needs
- Routing and ventilation are planned in from the outset based on the specific equipment being housed.
- Existing furniture
- Finish and detailing can be matched to other furniture already in the room where that suits the space.
- Placement
- Whether the unit sits centrally, to one side, or beneath a wall-mounted screen shapes its final proportions.
What can be included
01
Screen-led sizing
The unit's width and height are set from your actual television and mounting method, not a standard size range.
02
Bedroom-scaled design
Lower, simpler units designed to sit comfortably at the foot of a bed without dominating the room's proportions.
03
Living room storage capacity
Drawer and cupboard allocation planned around media equipment, books or household items that need a proper home.
04
Concealed cable routing
Power and equipment cabling routed within the unit so nothing is left trailing behind or beside it.
05
Equipment ventilation
Ventilation planned into enclosed sections housing equipment that generates heat during extended use.
06
Matched finish to existing furniture
Finish and hardware agreed to match or deliberately complement other furniture already in the room.
07
Wall-mounted or freestanding options
Design adapted depending on whether the unit sits beneath a wall-mounted screen or supports the television itself.
We survey and measure at the property, then design around the room as it is actually built.
Materials & finishes
Specifications are developed with you during the design stage and sampled before anything is built. Nothing here is a fixed range; we will say so where a material is the wrong choice for the room or the way it is used.
Painted timber cabinetry
Sprayed in a colour agreed and sampled before manufacture, finished for daily use in a bedroom or living room.
Oak and walnut veneers
Used for fronts and tops, grain-matched across the unit for a considered appearance.
Brushed brass and matt black hardware
Handles and hinges specified to suit the room's existing fittings and overall finish.
Soft-close hinges and runners
Fitted to doors and drawers for quiet, controlled daily use well beyond the first year.
Ventilated cabinet backs
Used where equipment inside the unit generates heat during extended everyday use.
Integrated cable routing fittings
Grommets and channels built in during manufacture to keep all cabling concealed from view.
How the work is done
We measure your television and discuss what needs to be stored before proposing a design, with drawings agreed before manufacture. The full sequence, from initial visit to fitted installation, is set out at the process page.
Read our full processExplore our work
Our published case studies show completed commissions in detail, from the brief through to installation.
View our projectsBespoke TV Units in Swadlincote — your questions answered
Design
- Will a TV unit be sized precisely to my specific television?
- The unit's width and any recess for the screen are set from your television's exact dimensions and mounting method, rather than a standard size assumed to fit most screens on the market, so the fit around your particular set is genuinely close. We work this through with you at the design stage against the room's actual measurements, rather than assuming a single approach suits every project regardless of its proportions.
- Is a standalone unit better than a full media wall for a smaller second reception room?
- In a smaller second reception room, a standalone unit often suits the proportions better than a full media wall, providing useful storage without dominating a space that's already tight, particularly common in Swadlincote's narrower Victorian terraces. This is agreed with you once we've surveyed the room properly, so the decision reflects the space in front of us rather than a default choice made on paper beforehand.
- Can a low unit be designed specifically for a bedroom?
- A lower, simpler unit suited to sitting at the foot of a bed can be designed with drawer storage for everyday items, kept deliberately understated so it doesn't dominate the room or compete visually with the bed itself. We discuss the practical trade-offs openly at the design stage, so you understand exactly why a particular approach is being recommended for your specific room rather than another.
- Can a unit be designed to sit beneath a wall-mounted screen?
- Where the television is already wall-mounted or will be, we can design a lower unit beneath it purely for storage, sized to complement the screen above rather than support it, which also keeps the wall itself looking uncluttered. Every decision like this is worked through against the room's real dimensions and how you intend to use the space, rather than following a fixed assumption from the outset.
Materials
- Can the unit be finished to match other furniture already in the room?
- Finish, colour and hardware can be matched to other furniture already in the room, agreed with you at design stage so the new unit reads as though it was chosen alongside the existing pieces rather than added on afterwards. These decisions are made from genuine samples rather than a printed swatch, so you know precisely what will arrive on installation day and how it will perform in daily use.
- What hardware do you specify for TV unit doors and drawers?
- Soft-close hinges and runners are specified for doors and drawers, with handle and hinge finish chosen to suit the room's overall look, whether that means brushed brass, matt black or something matched to existing fittings nearby. We keep physical samples of the relevant finishes so you can judge colour, grain and texture in your own home's light, and a sample piece can be produced before the wider order proceeds.
- Is ventilation built into an enclosed TV unit?
- Where equipment such as a games console or receiver is housed inside an enclosed section, ventilation is planned into the design to prevent heat build-up during extended use, agreed with you as part of the overall specification. Samples are brought to you in person wherever practical, since colour and texture read very differently under a showroom light than they do against your own walls and furnishings.
Installation
- How long does installing a bespoke TV unit take?
- A standalone TV unit typically installs more quickly than a full media wall, though the exact timescale still depends on its size and any cable coordination required, and we agree a realistic estimate with you before manufacture begins. We remain on site throughout installation to resolve any small adjustments as they arise, rather than leaving snagging to be picked up separately after the main work is finished.
- Will cables be visible once the unit has been installed?
- Cable routing is planned within the unit during manufacture, so once installed, power and equipment cables are not left trailing visibly behind or beside the unit, keeping the finished piece looking tidy from the front. We agree the fitting programme with you in advance and keep you informed of progress throughout, so any adjustment to sequencing is discussed rather than sprung on you during the works themselves.
Practical questions
- Can a unit include storage for board games or household items?
- Drawer and cupboard allocation can be planned around household items such as board games, ornaments or spare bedding, discussed with you at design stage so the storage suits what you actually need to keep near the television. This is something we plan around your own circumstances rather than a fixed rule, since two households with the same room size can have very different practical needs.
- Can the unit house a soundbar or games console safely?
- Equipment can be housed within the unit with appropriate ventilation and cable routing, agreed as part of the design before manufacture, so a soundbar or console sits securely and stays cool during regular use. We ask about this directly during the design conversation, so the finished specification reflects how you actually live rather than a standard configuration applied to every project.
- Should I choose a freestanding or wall-mounted approach?
- The right choice depends on the room and your television's mounting requirements; we discuss both approaches and their practical implications, including floor space and cable routing, with you during the design stage before settling on one. We talk this through with you at the design stage, so the finished piece is genuinely sized and configured around what your household needs rather than a generic assumption applied regardless of the room.
Cost
- What does a bespoke TV unit cost?
- Cost depends on the size of the unit, materials, hardware and any ventilation or cable management requirements. We do not quote a figure without seeing the space, so get in touch through the contact page to discuss your project properly. We do not quote a figure without seeing the space and understanding what you actually want included, so please get in touch through the contact page and we'll arrange a proper conversation about your project.
- Will drawings be provided before manufacture begins?
- Drawings showing dimensions and finish are agreed with you once the design is finalised, so you know exactly what will be built before any manufacturing work begins on the unit itself. Every quotation reflects the specific room, materials and complexity involved, which is why we prefer to discuss your project properly through the contact page rather than offer a general estimate in advance.
Chester Thomas
- Do you make TV units for households across Swadlincote?
- TV units are designed, built and fitted by us from the Derbyshire workshop, and Swadlincote sits comfortably within the wider area we work in regularly, alongside Woodville and Church Gresley. We keep the whole project in-house from design through manufacture to fitting, so nothing is handed off between separate businesses along the way.
- Can a TV unit be designed to match a media wall elsewhere in the house?
- Where a media wall already exists elsewhere in the home, a TV unit for a second room can be finished to complement it, carrying the same colour and hardware through so the two pieces feel part of one considered scheme. Every project is designed, built and installed by the same Derbyshire-based team throughout, so there's genuine continuity from the first conversation through to the day the finished piece is fitted in your home.
Related bespoke services
Bespoke furniture in Swadlincote
Bespoke furniture designed around the proportions of your Swadlincote home, built in our Derbyshire workshop.
Bespoke Media Walls in Swadlincote
A media wall built around your television, seating position and storage needs, rather than a generic panel with a screen bolted on.

Media Walls
Television, fire, storage and cabling resolved into one wall with proper proportions.
Bespoke Cabinetry in Swadlincote
Cabinetry designed for the exact proportions of a room, whether that's a single alcove or a complete boot room.
Fitted Wardrobes in Swadlincote
A fitted wardrobe built to the exact proportions of your bedroom, closing properly against every wall and ceiling line.
Speak to us about your bespoke tv units in Swadlincote on 07542 822456, email info@chesterthomas.com or send us the details.

Planning Something Bespoke?
Tell us about your space, what you're looking to create and where the project is located.
